Setup.ampedwireless.com is the default web address of the Amped WiFi extender that lets users configure and manage their devices. However, a lot of users are unable to access it successfully and run into issues. Are you also one of them? Well, no worries. This is the reason this post has been written.
Walk through the troubleshooting tips mentioned in this post and learn what to do if you are unable to access setup.ampedwireless.com. But, before that have a look at the correct steps to access setup.ampedwireless.com.
Steps to Access Setup.ampedwireless.com
- Power up your Amped range extender.
- Establish a wired or a wireless connection between your Amped extender and the host router.
- Thereafter, switch on your PC.
- Open a web browser like Chrome, Safari, Edge, Explorer, etc.
- Go to the address bar.
- Enter setup.ampedwireless.com.
- Press Enter.
- You will be taken to the Amped login page.
This is how you can access setup.ampedwireless.com. In case following the correct steps do not bear any fruit, refer to the troubleshooting tips mentioned in the next section.
Fixed: Can’t Access Setup.ampedwireless.com
1. Restart Your Amped Extender
Perhaps, technical glitches are hindering you from accessing setup.ampedwireless.com. To rid yourself of the problem, consider rebooting your Amped wireless extender. It might bring you success in accessing setup.ampedwireless.com by resolving technical glitches.
To restart your Amped extender, unplug it from the wall socket it is plugged into, let it rest, and connect it back to the wall outlet. Once done, see if you are still unable to access setup.ampedwireless.com. If yes, then give a shot to the next troubleshooting technique.
2. Check Extender-Router Connection
When it comes to accessing setup.ampedwireless.com, a high-speed internet connection is a primary requirement. Therefore, make sure that there is a stable connection between your Amped extender and the host router. In case you are using a wired connection, then ensure that the Ethernet cable connecting your Amped range extender and the host router does not have cuts. Apart from that, make sure that the connection is finger-tight.
If you don’t like a mess of wires and are using a wireless connection, then make sure that the distance between your WiFi devices is proper. It means both devices should be within range. However, they must not stick with each other. Else, it will result in a clash of WiFi signals of both devices.
3. Use the Correct Web Address
Well, that is a pretty obvious reason. But, many users are in so hurry that they enter the incorrect web address. Chances are that you are also in the same boat. Thus, rectify your mistake right away and use the correct web address. Keep your eyes open while typing it and cross-check it twice before pressing the Enter key.
Also, make sure that you are entering setup.ampedwireless.com into the address bar of the web browser. Keep in mind that using the search bar won’t take you to the Amped WiFi range extender login page.
4. Update the Web Browser
Did you update the web browser before accessing setup.ampedwireless.com? No? This is where you lagged. So, navigate to the Settings of the web browser first and update it.
What happened? Updating the web browser also fails to bear any positive result? It looks like your web browser is accumulated with unnecessary files. Therefore, consider deleting the cache, cookies, and browsing history of the web browser. Now, try to access setup.ampedwireless.com and see if you get success.
5. Disable Antivirus Applications
Yes, we understand that you have installed antivirus software and firewall applications on your PC to secure it from potential threats. But, do you know that they can also create obstacles in accessing setup.ampedwireless.com?
FYI, antivirus software are able to prevent access to various networking sites including setup.ampedwireless.com. Therefore, access the Control Panel of your PC and disable the antivirus application on a temporary basis.
In the Nutshell
By following the aforementioned troubleshooting techniques you might be able to access setup.ampedwireless.com. However, if you are still unable to climb the ladder of success, consider performing factory default amped extender reset of your extender and reconfiguring it. For this, long-press the Reset button and let the extender get restored to the factory default mode. It will surely help you. If you liked reading this post, then let us know in the comment section.
